Hi, Today I decided to install ESXi 8.0 Update 1.
Prerequisites
-
Hardware Requirements:
- Minimum of 2 CPU cores (64-bit x86 processor with VT-x or AMD-V support).
- 4 GB RAM (8 GB or more recommended for VMs).
- Storage: Minimum 8 GB boot disk (16 GB recommended).
- Network adapter compatible with ESXi.
- Ensure your hardware is listed on the VMware Compatibility Guide (HCL).
-
Download ESXi 8.0 U1 ISO:
- Go to the VMware Download Center.
- Download the ESXi 8.0 U1 ISO (requires VMware account).
-
Create Bootable Media:
- Use tools like Rufus, Etcher, or VMware Workstation to create a bootable USB or virtual media.
Installation Steps
Boot from Installation Media:
- Insert the bootable USB into the target server.
- Configure the server to boot from the USB or virtual media.
ESXi Boot Screen:
- On the boot screen, select “ESXi Installer” and press Enter.
Accept the License Agreement:
- Press F11 to accept the VMware End User License Agreement (EULA).
Select Installation Target:
- Choose the disk on which you want to install ESXi (e.g., local SSD, HDD, or SAN).
- Press Enter to proceed.
Select Keyboard Layout:
- Choose your preferred keyboard layout and press Enter.
Set Root Password:
- Enter a strong root password and confirm it. Press Enter to continue.
Confirm Installation:
- Press F11 to start the installation.
- The installer will partition the selected disk and install ESXi 8.0 U1.
Reboot
Post-Installation Configuration
-
Access the ESXi Direct Console Interface (DCUI):
- After reboot, log in using the root credentials.
- Configure network settings (IP address, subnet mask, gateway, and DNS) through the DCUI.
- Enter F2 for login to DCUI
Enter Username (root) and your password:
Finish 🙂
Facebook
Twitter
LinkedIn